Landships II

Members Login
Username 
 
Password 
    Remember Me  
Landships II -> Landships WW1 Forum -> References -> Someone has access to a Mark IV tank?
Post Info TOPIC: Someone has access to a Mark IV tank?
thorst


Colonel

Status: Offline
Posts: 210
Date:
Someone has access to a Mark IV tank?
Permalink   

Hi,

after purchasing a copy of the Owner's Workshop Manual about the Mark IV tank by David Fletcher I found that I could build a really well detailed and accurate model of the tank, using the original blueprints in the book. I've started working on a virtual 3D-model in CAD to base the model on, but the problem is that the original drawings contain actually too much information in such a small area and I needed to compare it to pictures. Unfortunately for some areas I'm not able to find suitable photos, could someone help me with detail pictures?

 

The current regions of interest are:

- petrol tank

- roof

- lower inside of chain roller housings in the areas of the chain roller clamps.

- track guide plates

 

Any help would be appreciated!

 

Best regards,

Thorsten



-- Edited by thorst on Thursday 18th of July 2013 02:03:18 AM

__________________
CharlieC


Legend

Status: Offline
Posts: 2326
Date:
Permalink   

 

There was a thread on this topic a few months ago - conclusion is that the holes are covered.

Attached is an image of "Grit" at the AWM showing the underside of the tank from the rear. You can see one of the cover plates just behind

the cross member.

The images of Grit may be useful - AMMS Brisbane

Regards,

Charlie

 



-- Edited by CharlieC on Saturday 20th of July 2013 01:52:53 AM

Attachments
__________________
thorst


Colonel

Status: Offline
Posts: 210
Date:
Permalink   

Hi,

can someone answer me the following question?:

The assembly drawing of the armor plates (inside view) given in the above mentioned book shows some holes in the inside vertical armor plates directly below the floor of the vehicle:

holes_question_01.jpg

Are these holes visible in the final tank, or are they covered? Can someone help me with a photo?

 

To show that it's not without reason for me to ask, here are two renders of the current state of my 3D-model:

Mark_IV_3d_010_small.jpgMark_IV_3d_016_small.jpg

Best regards,

Thorsten



Attachments
__________________
thorst


Colonel

Status: Offline
Posts: 210
Date:
Permalink   

Thank you very much! I searched the forum but couldn't find it, please excuse the double question!

Thorsten



-- Edited by thorst on Saturday 20th of July 2013 10:33:29 AM

__________________
TinCanTadpole


Legend

Status: Offline
Posts: 1062
Date:
Permalink   

Here's a link to the old thread:

http://landships.activeboard.com/t52661667/mark-iv-track-inspection-holes/



__________________
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
Landships II -> Landships WW1 Forum -> References -> Someone has access to a Mark IV tank?
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard