Landships II

Members Login
Username 
 
Password 
    Remember Me  
Landships II -> Landships WW1 Forum -> Modelling -> Lancelot
Post Info TOPIC: Lancelot
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Lancelot
Permalink   

Sorry, that should be Lanz - A Lot... smile

This is what happens if an Artillery Nut looses interest in his main subject... smile



Attachments
__________________

Tempus Omnia Revelat
CharlieC


Legend

Status: Online
Posts: 2318
Date:
Permalink   

 

Now you just need the 42cm M-Gerät on trailers to go with the tow vehicles....

Charlie

 



__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Charie,

Exactly my thoughts... smile

The base and the wheel are 3D prints. The parts in the second photo are the outer and inner side of the left hand side of the carriage. The third photo is the upper side of the carriage.

With kind regards,

-Arie.



Attachments
__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

Wow, Arie, looking good! What scale? 1/76?

__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Roger,

Nearly, 1/72. The Lanz is also partly a 3D print... The hoop of the back wheel, the front wheel and the air intake are prints. The inside of the chassis, the engine compartment and ballast box, are also prints but clad with styrene and details also in styrene. The spokes and the tread of the back wheels are also in styrene.

With kind regards,

-Arie.

 



Attachments
__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

Brilliant! Saves me from having to scratchbuild a Bertha...* wink

*Assuming you make it as a kit



-- Edited by Roger Todd on Monday 7th of August 2017 02:14:34 PM

__________________
28juni14


Hero

Status: Offline
Posts: 815
Date:
Permalink   

Arie,

I'm impressed !  Do you have drawings you've done for the Lanz ???   As one of the rarer traktors, I'm curious how you managed dimensions.

Jack / 28juni14



__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Roger,

I wouldn't be holding my breath if I were you. I have several projects dating back to 2014 that still haven't been completed...smile

 

Hi Jack,

Yep. See attached. They are rough drawings, as I haven't come round to put them to ink. I deduced the lenght and height from the size of the back wheel. The width was a bit more tricky, but was done in the same way. I first made a paper model to find out if I got the dimensions more or less right. These drawings are for the paper model I made. From that I started printing/building one in plastic.

 

With kind regards,

-Arie.

 



-- Edited by Arie Dijkhuis on Monday 7th of August 2017 06:15:05 PM

Attachments
__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

...a few step by steps...



Attachments
__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

...and a few more...



Attachments
__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

Arie Dijkhuis wrote:

Hi Roger,

I wouldn't be holding my breath if I were you. I have several projects dating back to 2014 that still haven't been completed...smile

-Arie.

 Ha ha!



__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Roger,

In fact, in the last three years I started at least 10 projects, but I finished only one. And no, it isn't the Lanz, as these are only in their base colour with two washes added...

With kind regards,

-Arie.



__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

And for those interested in scale drawings of the successor of the Lanz LB, the Lanz LC...



Attachments
__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Some of you might have warned me how much work this is going to be... smile



Attachments
__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

You got enough rivets there? wink

Seriously, looking good!



__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Roger,

Thanks! Yes, I have plenty of rivets. I use an old Airfix MK1 tank as a donor... smile

 



__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Who needs an expensive Punch and Die set, if you can get all the rivets you will ever need for just 5 quid... biggrin



__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Half a million rivets down, only 5 million more to go... smile

 

 



Attachments
__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

When you cast it as a kit, put me down for at least one, please!

__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Roger,

Request noted, but I have to refer to my previous answer about delaying your breathing process.. biggrin

Part of the barrel, a 3D print in 3 parts.. The breech still has to be done..

With kind regards,

-Arie.



Attachments
__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

No worries, Arie, quality is always worth waiting for!



__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

And now complete with breech. This was a bitch to draw in 3D due to the complex shapes. I also made the mistake of making the attachment parts for the recuperators too thin, so these didn't print too well and I had to redraw and print them again.

I am not too sure about the shape of the barrel though, especially the points where it tapers. Any comments?



Attachments
__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

I think this is closer to the mark, but again, any comments are welcome...



Attachments
__________________

Tempus Omnia Revelat
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

There are only so many rivets you can place before you get utterly bored, so I did some further 3D printing, this time of the back base. Both the front and the back base still have to be clad in styrene and the details have to be added.



Attachments
__________________

Tempus Omnia Revelat
28juni14


Hero

Status: Offline
Posts: 815
Date:
Permalink   

..... Excellent modelling!  Though I am more impressed with your research and dedication to accuracy; great drawings.



__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Jack,

Thanks!

I just finished printing the cradle. For ease of sanding etc, it is printed in 4 parts. It is designed so the gun tube can slide in, just like the real gun...

With kind regards,

-Arie.



Attachments
__________________

Tempus Omnia Revelat
Willem Visser


Brigadier

Status: Offline
Posts: 299
Date:
Permalink   

Mooi werk Arie!

Impessive work.
Willem

__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hoi Willem,

Dank je!

 

Hi Willem,

Thank you!



__________________

Tempus Omnia Revelat
Roger Todd


Legend

Status: Offline
Posts: 1393
Date:
Permalink   

Fantastic progress (and fast)!

__________________
Arie Dijkhuis


General

Status: Offline
Posts: 329
Date:
Permalink   

Hi Roger,

Thanks, but as today is the last day of my holiday, progress will slow down considerably... smile



__________________

Tempus Omnia Revelat
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Landships II -> Landships WW1 Forum -> Modelling -> Lancelot
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard