Landships II

Members Login
Username 
 
Password 
    Remember Me  
Landships II -> Landships WW1 Forum -> Artillery -> SFH/02 part query
Post Info TOPIC: SFH/02 part query
mtaylor


Sergeant

Status: Offline
Posts: 46
Date:
SFH/02 part query
Permalink   

Can anyone help me with this?  I thought I knew a little about the component parts of WW1 artillery pieces but can anyone enlighten me as to the function of this part of the sFH/02? (the pivoting strut with the holes next to the breech).

Thanks

FH02.jpg



Attachments
__________________
CharlieC


Legend

Status: Offline
Posts: 2326
Date:
Permalink   

I think it's a transport support for the rear of the barrel. It looks like it was swung underneath the breech and the barrel

lowered onto it. It looks as if the effect was to take the load of the barrel off the elevation gear with the weight of the barrel

carried by the trunnions and the support beam during transport. The only surviving sFH 02 in Queensland has a similar beam (attached).

Regards,

Charlie

 



Attachments
__________________
mtaylor


Sergeant

Status: Offline
Posts: 46
Date:
Permalink   

Hello Charlie - that makes sense.  Many thanks indeed.

Mike



__________________
Ralph Lovett


General

Status: Offline
Posts: 312
Date:
Permalink   

Charlie is correct.  These are for securing the howitzer barrel during travel.  I have two operational 15cm sFH 1902s.  Both have this travel lock.  They are also found on the 15cm sFH 1913, 15cm lgsFH 1913, and the 15cm lgsFH 1913/02. The older 15cm sFH 1893 does not have a travel lock.  Most of the 10cm Kanone series also have these.  

This page shows one of the 15cm sFH 1902s being restored.  The travel lock can be seen in the second photo from the top:

http://lovettartillery.com/15cm_sFH_1902_Restoration.html

R/

Ralph

 

 



__________________
Ralph Lovett
mtaylor


Sergeant

Status: Offline
Posts: 46
Date:
Permalink   

Ralph - many thanks for the extra info and the link to the very useful pics.  Could I please pick your brains once more? Would a barrel sitting back in the recoil position (as per pic attached) imply a broken recoil spring? - or are there other possible reasons?  Do you know of a drawing of the recoil mechanism in the sFH/02?

The more I look at this particular gun the more I think it was in for repair at the time of capture/surrender: barrel in recoil position, minor impact damage on recoil box, elevation mechanism removed, brake connecting system and brake lever removed, damage to carriage in vicinity of toolbox, possible missing control column from traverse gear (I need to check this) and one trunnion top plate not in secured position.  Food for thought.

Thanks again Ralph.

 

Mike

 

100_4100a.jpg



Attachments
__________________
Ralph Lovett


General

Status: Offline
Posts: 312
Date:
Permalink   

Mike

 

Yes, a broken recoil spring is likely the problem.  This is the page on the restoration of my other sFH 02.  It shows the recoil springs:

http://lovettartillery.com/15cm_sFH_1902_(1917_Dated_How_Rest.html

Pictures 7 and 8 from the top will be of the most interest.  Also, the third image from the bottom will be of interest.  Note that there are three separate springs.  These are often numbered and marked down to the individual machinist that made them.   

Hope this helps

 

R/

Ralph

 



-- Edited by Ralph Lovett on Wednesday 5th of August 2015 11:31:31 PM

__________________
Ralph Lovett
mtaylor


Sergeant

Status: Offline
Posts: 46
Date:
Permalink   

Ralph - thank you - terrific.

 

Mike



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Landships II -> Landships WW1 Forum -> Artillery -> SFH/02 part query
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard