Landships II

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Lebedenko Tsar Tank


Major

Status: Offline
Posts: 140
Date:
Lebedenko Tsar Tank
Permalink   


Project as e new construction 1/35. Ivo from Czech RepublicCAR2.jpgCAR3.jpg

 



Attachments
__________________


Commander in Chief

Status: Offline
Posts: 749
Date:
Permalink   

Wow. Good luck

__________________


Legend

Status: Offline
Posts: 2318
Date:
Permalink   

 

I hate to be the bearer of bad news but the Lebedenko tank used a simple radial pattern of spokes - this can be seen on the few images of the tank.

I made a 1:25 Lebedenko in card a few years ago - it took a long time to get over the experience, especially the wheels.

The blue and white scale cube in the image edge length is 50mm. 

Regards,

Charlie

 



-- Edited by CharlieC on Tuesday 6th of September 2022 03:12:37 AM

Attachments
__________________


General

Status: Offline
Posts: 358
Date:
Permalink   

CharlieC wrote:

 I hate to be the bearer of bad news


 And I assume you are aware of that:
https://armorama.com/news/copper-state-models-tsar-tank


__________________

"Siplicity is the ultimate sophistication" -Leonardo Da Vinci-



Legend

Status: Offline
Posts: 2318
Date:
Permalink   

 

No, I did say based on the few images of the tank - especially the image taken before the tank was scrapped in the 1920s.

http://landships/landships/tank_articles.html?load=/landships/tank_articles/Lebedenko.html

The modelling world is full of replicated errors such as the green Mark IV tanks - one plastic model company makes an error and the rest follow.

Charlie

 



__________________


General

Status: Offline
Posts: 358
Date:
Permalink   

Sorry Charly, it seems that my bad englisch led to some misunderstanding. I just wanted to say, that I have some further bad news. Before starting this project, Yvo should take a look at the CSM facebook site. They are going to release that beast in 1/35 too!



__________________

"Siplicity is the ultimate sophistication" -Leonardo Da Vinci-



Major

Status: Offline
Posts: 140
Date:
Permalink   

Good evening. Thank you for your response. Ivo

__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

CAR 12.jpgcar13.JPGcar16.JPGcar23.JPGcar115.JPG... further work progress ...



-- Edited by flighter20 on Thursday 8th of September 2022 12:07:17 PM

Attachments
__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Mcar07__1024x768px_74kB.jpgcar08__1024x768px_81kB.jpgcar09.JPGCAR14.jpgore work ...



Attachments
__________________


Lieutenant-Colonel

Status: Offline
Posts: 154
Date:
Permalink   

What is that photo in the background?

Below with "Yury Morozov artmaquette@mail.ru"



__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Good day everyone. The photos show a tank model by Y. Morozov. It is one of the inspirations for me when building the model. Construction continues on wheels.


Attachments
__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

... more work ...car41__3283x2701px_3039kB.jpgcar43__2300x1725px_345kB.jpgcar44__2304x1728px_301kB.jpgcar45__456x418px_41kB.jpg



Attachments
__________________


Lieutenant

Status: Offline
Posts: 69
Date:
Permalink   

That looks like a fun project to undertake, especially if you have the tools to do it. This is a multi medium project for sure. I will follow this work and see how it turns out. Thanks for taking the time to photograph and post you work.

__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Thank you, work has not stopped smile..car10__2004x1503px_120kB.jpgcar9__2004x1503px_110kB.jpgcar45__1000x750px_113kB.jpgcar105__2004x1503px_119kB.jpgcar111__2004x1503px_178kB.jpgCAR226__2204x1653px_160kB.jpgCAR229__2204x1653px_145kB.jpg.Ivo



Attachments
__________________
Ned


General

Status: Offline
Posts: 308
Date:
Permalink   

Great work looking forward to its completion 



__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

CAR2.JPGCAR3.JPGCAR5.JPGcar7.JPGcar8.JPGcar9.JPGcar10.JPGcar12.JPGThank you, work on the model continues ...



Attachments
__________________


Lieutenant

Status: Offline
Posts: 69
Date:
Permalink   

I'm glad to see you are still working in this impressive undertaking. On Copper State Models Facebook page a few months back, they had mentioned about creating a kit in the 1/35th scale, but I have not seen any mention of their progress on it or if it is even still something they are going to undertake, so it is nice to see this one. Thanks for sharing your progress on this one.



__________________


Legend

Status: Offline
Posts: 2318
Date:
Permalink   

 

1:35 Lebedenko - a mere bagatelle - the Polish cardmodel publisher Wektor has a 1:25 Lebedenko. As a model, it's quite reasonable until you get to

the wheels when you realise the instructions are saying " this is what it should look like - you figure out how to build it ".

The wheels seem to have had radial spokes, unlike most spoked wheels.

Charlie

 



-- Edited by CharlieC on Friday 29th of March 2024 12:12:32 PM

Attachments
__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Hello Charlie, you have already written about bad wheels twice in this thread. I assume that your solution is correct according to you - can you please post a detailed photo of the wire attachment on your model? The last photo is not clear enough...Thank you, Ivo

__________________


Legend

Status: Offline
Posts: 2318
Date:
Permalink   

I've got to pull the model out of storage and take some images - day or so.

I thought that it might be worth considering why the Lebedenko has a radial spoke pattern. You would expect that

something like scaled up spoke pattern on a bicycle wheel would be satisfactory. I don't know how many people today have tried

to rebuild a spoked wheel but from experience it's a nightmare even on small wheels. Once the spoke pattern is figured out and the spokes tied

together so the pattern isn't lost fitting the rim is a tedious and fiddly job. It takes ages to get the wheel hub centred and running without wobbling. 

Looking at the way the Lebedenko wheels seem to have been constructed they could have made on a simple jig with radial spokes you don't have

the concerns about fitting the rim over the spokes.

I found some images via Yandex which seem to be somewhat clearer than the tiny images in most western web pages - and an image of my model which shows 

the rim - I'll get some better images than this one.

The designer of the Wektor Lebedenko model designed a jig to build the wheels on - this proved to be essential. The spokes on my model are annealed 1mm Copperwire - they were painted black - the reason they are still Copper coloured in the image is the old "quick - get some images - I've finally finished it".  I've still got the jig around (somewhere) and will get an image of it.

Charlie  

 

   



Attachments
__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Hello, work continues... IvoCAR1.jpgCAR2.jpg



Attachments
__________________
Ned


General

Status: Offline
Posts: 308
Date:
Permalink   

Look good ! You have to wonder how it would have done on the battlefield 



__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Hello gentlemen. The model is almost complete. Iam working a pedestal. IvoCARMG_3825__1801x1522px_386kB.jpgCAR IMG_3826__2004x1490px_300kB.jpg



Attachments
__________________


Lieutenant-Colonel

Status: Offline
Posts: 154
Date:
Permalink   

Very good work. Can you take a photo so we can see how big the model is, maybe a lighter or matchbox or coin next to it.

__________________


General

Status: Offline
Posts: 358
Date:
Permalink   

I must admit, I never liked this tank, but you did a very fine job on this ugly chap! It's the finest model of it I have seen so far, and especially the weathering is top notch.

Congrats!



__________________

"Siplicity is the ultimate sophistication" -Leonardo Da Vinci-



Major

Status: Offline
Posts: 140
Date:
Permalink   

Thank you gentlemen. There is a FT 17 1/35 to compare size. IvoCARMG_3828__4196x3158px_3640kB.jpg



Attachments
__________________


Legend

Status: Offline
Posts: 2318
Date:
Permalink   

 

That's a really nice build and the weathering looks really well done. There are lots of detail differences between the cardmodels (1:25 and 1:48)

which isn't surprising considering the models are based on a handful of rather limited images (and a lot of guesswork).

The Lebedenko was a triumph of royal patronage over common sense - it would have been torn to fragments by artillery if it ever had appeared

on a battlefield.

Charlie

Edit - a thing we used to do in papermodelers.com was to take an image with a scale cube to give some idea of the physical size of a model. I got sneered at severely when i suggested that to some plastic modellers but I put that down to them inhaling glue and paint thinner fumes for too long. I've attached a simple scale cube.

 



-- Edited by CharlieC on Saturday 17th of August 2024 08:05:14 AM

Attachments
__________________
Ned


General

Status: Offline
Posts: 308
Date:
Permalink   

Amazing work...thank you..



__________________


Major

Status: Offline
Posts: 140
Date:
Permalink   

Hello everyone, construction is over. IvoC10__896x998px_77kB.jpgC9__1182x1121px_109kB.jpgC8__1081x923px_111kB.jpgC7__1081x888px_108kB.jpgC6__1259x945px_148kB.jpgC5__1081x811px_106kB.jpgC3__1981x1579px_259kB.jpgC2__1002x829px_96kB.jpgC1__1681x1326px_262kB.jpg



Attachments
__________________
Ned


General

Status: Offline
Posts: 308
Date:
Permalink   

Great work 



__________________


Field Marshal

Status: Offline
Posts: 433
Date:
Permalink   

Very nice model, bravo!

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard