Landships II

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Mk VIII Tank Strange brackets


Captain

Status: Offline
Posts: 78
Date:
Mk VIII Tank Strange brackets
Permalink   


Does anyone know what these brackets on the Mk VIII were for?  They are triangular with a small stop at the bottom and give the impression of being sockets for something to fit into.  There are on each side towards the front just behind the ID stripes, towards the rear behind the side door, on the rear top corner of the sponson and front and rear each side of the upper superstructure.  So 5 each side and not all at the same level.  Not seen them on any other design.  Even the factory model at Bovington has them so they are not a later addition.  They are riveted into construction seams, not riveted or bolted separately.  They were on the prototype and on US-built tanks.  So clearly have a purpose.

The most obvious thought was for some sort of camouflage poles, but why triangular section?  A round pole might slip through and not be retained as the retaining strip is narrow and most of the bottom is open.  Seemingly intended for something triangular.  Fleetingly, brackets for railway-type oil lamps crossed my mind - but too many and in odd places.

TorQ04e.jpg

 



__________________
Peter Smith


Legend

Status: Offline
Posts: 2320
Date:
Permalink   

 

They are brackets for the removable posts which hold up the camouflage net. The Mark VIII standard equipment lists a camouflage net and a tarpaulin.

The 1925 manual for the Mark VIII identifies them.

https://archive.org/details/prelimhandbookMarkVIIItank/page/n37/mode/2up

There are 4 on the turret, 6 on the hull and 2 on the sponsons (no idea where those are)

Charlie

 

 



Attachments
__________________


Captain

Status: Offline
Posts: 78
Date:
Permalink   

Thank you. As for numbers, I missed the 2 brackets at the hull rear beneath the rear sloping ends of the unditching beam rails. That makes the 6 on the hull.

The sponson brackets are on the top rear corner of each sponson. And I had no idea that 1 of the 2 preserved vehicles in the US was the air-cooled engine conversion.

__________________
Peter Smith
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard